The work that goes into a fence before the first post is driven has a lot to do with how long it lasts. A fence built through fallen timber, regrowth and rough ground will always be harder to tension, harder to maintain and more likely to be damaged down the track. A fence built on a properly cleared line starts with every advantage.
On the Western Downs, plenty of fence lines haven’t seen a machine in years. Old boundaries get overgrown, timber drops along the line, and regrowth creeps in until you can barely see the wire. If you’re planning a new fence, or replacing an old one, clearing the line first is one of the best things you can do for it.
What Fence Line Clearing Involves
Fence line clearing is about creating a clean, workable strip for the new fence to go in and for you to maintain it afterwards. Depending on the property, that can include:
Removing fallen timber, branches and debris from along the line
Clearing regrowth and scrub that has grown up along the old fence
Pulling out and tidying up old, broken fencing that’s being replaced
Smoothing out rough or uneven ground where practical
Slashing or mulching grass and lighter growth along the line
We use a skid steer for this work through our property clearing and land clearing services, which lets us work along the line efficiently and leave it ready for fencing.
Why a Clear Line Makes a Better Fence
A good fence relies on straight runs, even wire tension and posts set properly in the ground. All of that is much easier to achieve on a clear line.
When a fence is built through timber and regrowth, wires end up running around obstacles, posts get set wherever there’s room rather than where they should go, and tension is harder to keep even. Branches and regrowth left close to the fence also push on wires over time and drop debris onto the line.
A cleared line lets the fence go in where it’s meant to, with posts spaced properly and wires strained correctly from end to end. It also means nothing is sitting against the fence from day one.
Dealing With the Old Fence
When a new fence is replacing an old one, the old fence needs to come out properly first. Broken wire left lying in long grass is a real hazard. It can tangle around stock legs, wrap around machinery and catch slashers, and it’s often hard to spot until it causes a problem.
Old posts, rusted droppers and sections of netting also need to be cleared from the line so they don’t get in the way of the new fence. Pulling the old fence out and clearing the line at the same time keeps everything tidy and means the new fence goes onto a clean strip with nothing left behind to cause trouble later.
Clearing for Dog Netting
Dog netting is only as effective as its weakest point, and that’s usually at ground level. To keep wild dogs out, netting needs to sit snug against the ground and be secured properly so dogs can’t push or dig underneath.
That’s much harder to achieve on rough ground covered in logs, branches and regrowth. Debris under the netting creates gaps, and uneven ground leaves low spots where dogs can get through. Clearing and tidying the line first gives the netting a consistent surface to sit on, which makes a big difference to how well it holds up.
If you’re planning new dog netting or exclusion netting as part of your rural and residential fencing work, clearing the line properly beforehand is one of the most important parts of the job.
Better Access for Checking and Repairs
A cleared fence line isn’t just better for building the fence. It also makes it far easier to look after.
With a clear strip along the fence, you can drive or walk the line to check for damage, spot problems early and get repair materials in without fighting through scrub. After a storm, a clear line means you can see straight away where a tree has come down or a section has been damaged.
Kept slashed, a cleared fence line can also double as a firebreak and an access track along the boundary.
How Much Clearing Is Enough?
The right amount of clearing varies from property to property. It depends on the type of fence, the vegetation along the line and how you plan to access it in the future.
As a general rule, the line should be wide enough for the fencing machinery and vehicles to work safely, and wide enough to give you ongoing access for checks and repairs. Where large trees sit close to the line, it’s also worth thinking about limbs that could fall onto the fence in future storms. We’ll walk the line with you and recommend what makes sense for your property and the fence going in.
What Happens to the Cleared Material?
Clearing a fence line can produce a fair bit of material, from fallen timber to regrowth and old fencing. There are a few ways to deal with it.
Where it suits, slashing and mulching breaks down lighter material and spreads it back over the ground, so there are no piles to move or burn later. Heavier timber can be pushed clear of the line with the skid steer. If you’re thinking about burning piles, keep in mind that many fires in Queensland need a permit, so check with your local fire warden first.
Check the Rules Before Clearing New Ground
Clearing an existing fence line is a routine job on most properties. Clearing a brand new line through native vegetation can be a different story. Queensland’s vegetation management rules may apply depending on the vegetation and where the new line runs, so check with the Queensland Government before clearing new ground. If you’re not sure, raise it with us when we look at the job.
Get In Before the Ground Gets Too Wet
Summer is usually the wettest time of year on the Western Downs, and black soil country can become boggy and difficult to work once the rain sets in. Clearing a fence line and setting posts in saturated black soil is slow going, and it can make a mess of the ground.
If you’re planning new fencing, getting the clearing done while conditions are workable keeps the job moving. It also means the fence can go in sooner, rather than waiting weeks for the ground to dry out.
Clearing and Fencing From One Team
Booking clearing and fencing separately means coordinating two contractors and waiting for both to line up. Because we offer land clearing services and fencing, the whole job can be planned and completed by one team. We clear the line, then build the fence, with no gap in between and no confusion about who’s responsible for what. The people clearing the line know exactly what the fence needs, because they’re building it too.
We’re based in Dalby and work across the Western Downs, and you can see examples of our fencing and clearing work on our projects page.
Land Clearing Services for Fence Lines Across the Western Downs
A properly cleared fence line gives your new fence the best possible start. It makes the fence easier to build and maintain, helps dog netting work the way it should and gives you better access for the life of the fence.
G8K Rural Co provides land clearing services, fence line preparation and rural fencing across Dalby and the Western Downs. If you’re planning new fencing, contact us today to book a site visit and get the line cleared and fenced in one go.